EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Demand Controller is a remarkably efficient photo voltaic controller created for off-grid photo voltaic systems. Dependant on multiphase synchronous rectification know-how, it makes certain optimized Electrical power conversion and technique security for a wide range of photovoltaic (PV) apps.
Key Capabilities in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Demand Controller engineering for superior solar Electrical power harvesting. Essential capabilities consist of:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Sophisticated MPPT Algorithm with >99% effectiveness.
Twin-Phase Charging for enhanced battery lifetime.
LCD Screen with serious-time information monitoring.
Many Load Command Modes such as manual and timer.
Thorough Digital Protections in opposition to overcharging, above-discharging, small circuits, and reverse polarity.
Step-by-Action Information to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Assure all components are included: Tracer AN device, temperature sensor, conversation cables, and person manual.
Verify the design range and voltage ratings match your solar panel and battery specs.
two. Mounting the Demand Controller
Pick a effectively-ventilated, dry place close to the battery financial institution.
Safe the Tracer AN controller using the offered mounting brackets.
Preserve good clearance for warmth dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Often stick to proper safety protocols and ensure the process is powered off in advance of connecting elements.
Step 1: Join the battery terminals for the demand controller (optimistic to good, negative to detrimental).
Phase two: Hook up the solar panel array towards the PV input terminals.
Move 3: Join the load terminals if employing a immediate load link.
Action four: Double-check all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electricity about the controller by connecting the battery very first.
Utilize the LCD Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, More info timer, gentle Manage.
5. Checking and Knowledge Logging
The Tracer AN Series supports genuine-time monitoring utilizing the MT50 remote meter.
Info can be logged by means of the RS485 interaction port applying program including Photo voltaic Station Laptop.
Distant monitoring is achievable With all the EPEVER WiFi module.
six. Troubleshooting Widespread Difficulties
Problem one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Concern 2: Above-Voltage Security
Confirm the photo voltaic array’s voltage rating.
Change technique parameters if essential.
Problem 3: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations inside the menu.
Benefits of the Tracer AN Collection with MSR Know-how
The multiphase synchronous rectification technology guarantees:
Increased Performance: Reduced Vitality losses through conversion.
Enhanced Dependability: Steady general performance below variable masses.
Extended Battery Daily life: Regular and exact charging profiles.
Conclusion
The EPEVER Photo voltaic Cost Controller with multiphase synchronous rectification know-how is an Excellent choice for optimizing solar power era and increasing battery lifestyle. By subsequent the above setup tutorial, customers can guarantee most efficiency and system longevity.